Door Glass

REMOVAL

1. Remove the door trim and service hole cover.

2. Remove the parts in the numerical order shown in the figure.

Fig. 12-16

Fig.

Weatherstrip Yaris

12-19

Without Ventilator Window

1. Weatherstrip 2 Channel Mounting Bolt 3. Glass & Channel

With Ventilator Window

Fig.

1. Glass Run

2. Division Bar

3. Vent Window

4 Channel Mounting Bolt 5. Glass & Channel

12-19

Fig. 12-17

Fig. 12-17

[Ventilator Window] Remove the bolt

Fig. 12-18

Fig. 12-18

Fig. 12-19

0 [Ventilator Window] Take out the ventilator window.

1. Pull up the ventilator window.

2. Turn the ventilator window to the left.

Fig. 12-19

Pull the glass upward to remove.

Fig. 12-20

Pull the glass upward to remove.

With Ventilator Winde 171mm (6.73in.)

REPLACEMENT

1. Remove the glass channel with a screwdriver or such.

2. Apply soapy water to the inside of the weatherstrip.

3. Install the channel by tapping it with a plastic hammer.

With Ventilator Winde 171mm (6.73in.)

Ventilator Window 176.5mm (6.949in.)

Fig. 12-20

Ventilator Window 176.5mm (6.949in.)

INSTALLATION

1. Install the parts in the numerical order shown in the figure.

Fig. 12-21

Without Ventilator Window

Fig. 12-22

1. Glass & Channel 2 Channel Mounting Bolt 3. Weatherstrip

With Ventilator Window

1. Glass & Channel

2 Channel Mounting Bolt

3 Ventilator Window

4 Division Bar

5 Glass Run

2. Install the service hole cover and door trim.

Fig. 12-22

With the door glass in position as shown in the figure, tighten the equalizer arm bracket.

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Responses

  • Luciana
    How to fix window winder toyota landcruiser?
    7 years ago

Post a comment