J

Fig. 8-283

Fig. 8-283

Shaft & Bushing

Inspect for wear or damage.

Fig. 8-284

Drag Link, Tie Rod & Relay Rod

1. Inspect the link and rod for bending or cracks.

2. Inspect the ball joint for wear.

INSTALLATION & ASSEMBLY

Install and assemble the parts in the numerical order shown in the figure.

Fig. 8-285

Fig. 8-285

Center Arm Toyota Landcruiser

1 Relay Rod

2 Tie Rod

3 Shimmy Damper

4 Center Arm

5 Center Arm Bracket

6 Drag Link

Fig. 8-286

Fig. 8-286

Adjust the length L of relay rod to the standard value.

Relay rod length: STD 842 mm (33.15 in.)

Fig. 8-287

Fig. 8-287

Adjust the length L of tie rod to the standard value.

Fig. 8-288

Grease the parts and assemble them in the order shown by numbers.

Tighten the nut 4 fully and then unscrew it 1/4

turn.

Tighten the bolt 5 fully.

Fig. 8-289

fefj-

JimifinxrlrA

Grease the parts and assemble them in the order shown by numbers. Tighten the end plug 6 fully and then unscrew it 1/2 turn.

Adjust the length L of drag link to the standard value.

Drag link length: STD 855 mm (33.66 in.)

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment