Left Back Door Lock

REMOVAL

Remove the parts in the numerical order shown in the figure.

Fig. 12-115

Back Door Landcruiser

1.

Door Inside Handle Bezel

9.

Slide Block

2.

Door Trim

10.

Upper Lock Striker & Spacer

3

Door Inside Handle & Link

11.

Lower Lock Striker

4

Service Hole Cover

12.

Slide Block

5.

Door Lock Lower

13

License Light

6.

Door Lock Upper

14

Left Door

7

Slide Block

15.

Slide Block

8

Link Turn Block

0 Insert a screwdriver between the door panel and retainers and pry out.

Tape the screwdriver tip before use.

Fig. 12-117

Fig. 12-117

Remove the inside handle.

Fig. 12-118

Fig. 12-118

Remove the link.

Fig. 12-119

Toyota Hilux Back Door Lock

INSPECTION

1. Operation of moving parts

2. Lubrication of lock sliding parts

INSTALLATION

Install the parts in the numerical order shown in the figure.

Fig. 12-120

1

Slide Block

9.

Slide Block

2.

Left Door

10.

Door Lock Upper

3

License Light

11.

Door Lock Lower

4

Slide Block

12.

Service Hole Cover

5

Lower Lock Striker

13

Door Inside Handle & Link

6

Upper Lock Striker

14

Door Trim

7

Slide Block

15

Door Inside Handle Bezel

8 Link Turn Block

8 Link Turn Block

Fig. 12-121

Fig. 12-121

Seal the service hole cover with adhesive.

Fig. 12-122

Fig. 12-122

ADJUSTMENT

Inside Handle

1. Loosen the screws.

2. Move the handle forward to the point where strong resistance is felt.

3. Turn backward 0.5 - 1.0 mm (0.020 -0.039 in.) and tighten.

Fig. 12-123

Fig. 12-123

Fig. 12-124

Door Lock Striker (Upper)

Loosen set screws and adjust so that the door closes softly.

1. When closing the door be careful of the door upper indentations.

2. When opening the door be sure that there is no interference between the door check and upper lock.

If there is interference adjust the up-down direction.

Door Lock Striker (Lower)

Loosen the set screws and adjust so the door closes softly.

1. When closing the door be careful of the door indentations.

2. If there is a door sag, adjust with the door hinge, not with the door lock striker.

Fig. 12-125

Fig. 12-125

Fig. 12-126

Slide Block

Loosen the set screws and adjust so the door closes softly.

1. When closing the door be careful of the door lower indentations.

2. When opening the door be sure that there is no interference between the door check and upper lock.

If there is interference, adjust the upper lock protrusion.

Door Lock Upper

Before installing, turn the door upper lock rod and adjust the lock protrusion. Protrusion:

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Responses

  • carambo goold
    How to open toyota Hilux door lock?
    8 years ago

Post a comment