Rear Axle Hub Full Floating Type

REMOVAL

Remove the parts in the numerical order shown in the figure.

Full Floater Rear Toyota Axle Pics

1. Rear Axle Shaft

2. Brake Drum

3. Adjusting Nut & Lock Washer

4. Axle Hub

Remove the rear axle shaft.

REAR AXLE SHAFT (FULL FLOATING TYPE) REMOVAL SECTION Fig. 7-19 & 7-20

Toyota Full Float
Fig. 7-28

[ I Remove the adjusting nut with SST. SST [09509-2501 1]

INSPECTION & REPAIR Rear Axle Housing

Inspect the parts identicated by arrows for wear or damage.

Rear Axle Hub & Bearing

Inspect the bearings and oil seal for wear or damage.

Replace The Bearing

I++I 1. Remove the oil seal with a screw driver.

02. Remove the bearing outer races with a drift.

3. Install the new bearing outer races with SST.

SST [09608-35013]

4. Pack MP grease into the hub and bearings.

05. Install the inner bearing and oil seal with SST.

SST [09608-35013] A 6. Apply MP grease on the oil seal.

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Responses

  • lori
    How to pull out axles full floater landcruiser?
    8 years ago

Post a comment