Rear Axle Shaft Full Floating Type

COMPONENTS

1. Nut & Cone Washer

2. Rear Axle Shaft

3. Oil Seal

REMOVAL

1. Remove the nuts and cone washers with a tapered punch.

REMOVAL

1. Remove the nuts and cone washers with a tapered punch.

02. Remove the rear axle shaft by tightening the bolts.

INSPECTION & REPAIR Rear Axle Shaft

Inspect the parts identified by arrows for wear or damage.

0 Replace The Rear Axle Shaft Oil Seal

1. Remove the oil seal with SST. SST [09308-00010]

2. Install the new oil seal with SST. SST [09517-36010]

3. Apply MP grease on the oil seal.

2. Install the new oil seal with SST. SST [09517-36010]

3. Apply MP grease on the oil seal.

INSTALLATION

Install the rear axle shaft and tighten the nuts. Tightening torque: 2.8 - 3.5 kg-m (21 - 25 ft-lb)

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Responses

  • Susan
    What kind of grease to use on the rear axle of a Toyota Prius?
    6 years ago

Post a comment