V

Pry the link with screwdriver and disconnect the link from the motor.

INSTALLATION

Install the parts in the numerical order shown in the figure.

Fig. 13-101

1.

Motor

6.

Pivot Setting Screw

2.

Plate

7.

Pivot Cover

3.

Link

8.

Pivot Cover

4.

Motor & Link

10.

Service Hole Cover

5.

Pivot Setting Screw

Fig. 13-102

Before installing the motor, connect the motor link.

1. Temporarily connect the connector.

2. Turn on the wiper switch and stop the motor at the automatic stop position.

Fig. 13-103

Fig. 13-103

3. Install the motor arm.

Fig. 13-104

Fig. 13-104

04. Install the motor link as shown in the figure.

Coat MP grease at the joint parts.

Fig. 13-106

Fig. 13-106

After connecting the motor and link, install the motor

Fig. 13-107

Fig. 13-107

Install the link under the reinforcement.

0 Install the wiper arm. 1. Place the wire motor in the automatic stop position.

2. Install the wiper arm at the lower position.

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment