Connect No Vehicle Speed Sensor Connector

7. DISCONNECT SPEED SENSOR NT AND SP2 CONNECTORS

8. REMOVE SPEED SENSOR NT AND SP2

(a) Remove the 2 bolts, speed sensor NT and SP2.

(b) Remove 2 O-rings from the speed sensor NT and SP2. 9. INSTALL SPEED SENSOR NT AND SP2

(a) Coat 2 new O-rings with ATF and install them to the speed sensor NT and SP2.

(b) Install the speed sensor NT and SP2 with 2 bolts.

Torque: 5.4 N-m (55 kgf-cm, 48 in.-lbf) 10. CONNECT SPEED SENSOR NT AND SP2 CONNECTORS

Was this article helpful?

+1 -1

Post a comment