Disassemble Shift Lever Guide Housing

(a) Using a screwdriver, pry up the 3 shift lever nuts.

(b) Using nippers, cut the 3 shift lever nuts off then.

HINT:

Remove the shift lever lock pin of the shift lever nut in the same way.

(c) Remove the shift lever guide cushion.

(d) Remove the 3 screws, the shift lock control ECU and the shift lock solenoid.

(e) Remove the shift lock control ECU bracket from the shift lock control ECU.

(f) Disconnect the transmission control switch connector from the shift lever guide housing.

(g) Remove the shift lock release button and the spring.

(h) Using a screwdriver, pry up the shift lever nut.

(i) Using nipper, cut the shift lever nut off then.

(j) Remove the shift lever lock pin, the shift lock plate stopper and the cushion.

Was this article helpful?

0 0

Post a comment