Disconnect Shift Lock Control Ecu Shift Lock Solenoid Shift Lock Control Switch And Transmission Control Switch

(a) Disengage the secondary locking device of the shift lock solenoid.

(b) Release the locking lug of the terminal 4 and 5, and pull the terminals out from the rear.

HINT:

Remove the transmission control switch in the same way.

(c) Remove the shift lock solenoid.

(d) Using 2 mm dia. steel wire, remove the pin and the shift lock solenoid link from the shift lock solenoid plunger.

(e) Disengage the secondary locking device of the shift lock control ECU.

(f) Release the locking lag of the terminal 1, 2 and 8 pull the terminals out from the rear.

(g) Remove the transmission control switch. (Do 4)

(h) Release the locking lag of the terminal 5, 6 and 12 and pull the terminals out from the rear.

(i) Remove the transmission control switch. (2oL)

(j) Release the locking lag of the terminal 7 and 14 and pull the terminals out from the rear.

(k) Remove the indicator lamp wire.

Was this article helpful?

0 0

Post a comment