(a) Remove the 4 bolts and the 2 upper bracket.
(b) Lift up condenser, then remove the 4 bolts and the 2 center bracket.
(c) Remove the 2 bolts and the 2 center bracket.
(d) Remove the condenser. HINT:
At the time of installation, please refer to the following item If condenser is replaced, add compressor oil to condenser. Add: 40 - 50 cc (1.4 - 1.7 fl.oz.) Compressor oil: ND-OIL 8 or equivalent
Installation is in the reverse of removal (See page AC-16 ).
Was this article helpful?