Transmission Fill

(a) Fill the transmission with the correct amount of fluid as listed in the table below.

(b) Reinstall the refill plug to avoid fluid splash.

Repair

Fill Amount

Transmission pan and drain plug removal

1.3 liters (1.37 US qts, 1.14 Imp. qts)

Transmission valve body removal

3.9 liters (4.12 US qts, 3.43 Imp. qts)

Torque converter removal

5.3 liters (5.60 US qts, 4.66 Imp. qts)

Entire transmission assembly

5.3 liters (5.60 US qts, 4.66 Imp. qts)

HINT:

If you cannot add the listed amount of fluid, do the following:

(1) Install the refill plug.

(2) Allow the engine to idle with air conditioning OFF.

(3) Move the shift lever through entire gear range to circulate fluid.

(4) Wait for 30 seconds with the engine idling.

(5) Stop the engine.

(6) Remove the refill plug and add fluid.

(7) Reinstall the refill plug. 4. FLUID CIRCULATION

(a) Allow the engine to idle with the air conditioning OFF.

(b) Move the shift lever through entire gear range to circulate fluid.

Was this article helpful?

+1 0

Post a comment