• Thoroughly clean all parts to be assembled.
• Before installing the parts, apply new engine oil to all sliding and rotating surfaces.
• Replace all gaskets and oil seals with new ones.
1. INSTALL VALVES
(a) Using SST, push in a new oil seal. SST 09201-41020
HINT: The intake valve oil seal is brown and the exhaust valve oil seal is black.
(b) Install the following parts:
(2) Spring seat
(3) Valve spring
(4) Spring retainer em7559
(d) Using a plastic-faced hammer, lightly tap the valve stem tip to assure proper fit.
Was this article helpful?