(d) Remove the three bolts, two nuts, converter, gasket, retainer and cushion.
(e) Remove the nine bolts and two heat insulator from the converter.
8. REINSTALL MAIN CATALYTIC CONVERTER
(a) Install the two heat insulators to a new converter with the nine bolts.
(b) Place the cushion, retainer and a new gasket on the converter.
(c) Install the converter with the three bolts and two new nuts.
(d) Install the RH converter stay with the four bolts. Torque: 600 kg-cm (43 ft-lb, 59 N-m)
Was this article helpful?