Inspection Of Ignition Coil

1. DISCONNECT IGNITION COIL CONNECTOR

2. DISCONNECT HIGH-TENSION CORD FROM IGNITION COIL (See procedure step 3 on pages IG-16 and 17)

Inspect Primary Coil

3. INSPECT PRIMARY COIL RESISTANCE

Using an ohmmeter, measure the resistance between positive ( + ) and negative (-) terminals.

Primary coil resistance (Cold): 0.40 - 0.50 Q

If the resistance is not as specified, replace the ignition coil.

NE Pickup

4. INSPECT SECONDARY COIL RESISTANCE

Using an ohmmeter, measure the resistance between positive ( + ) and high-tension terminals

Secondary coil resistance (Cold): 10.0 - 14.0 kQ

If the resistance is not as specified, replace the ignition coil.

5. RECONNECT HIGH-TENSION CORD TO IGNITION COIL (See procedure step 5 on pages IG-16 and 17)

6. RECONNECT IGNITION COIL CONNECTOR

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment