Installation Of Fuel Pressure Regulator

1. INSTALL FUEL PRESSURE REGULATOR

(a) Apply a light coat of gasoline to a new O-ring, and install it to the pressure regulator.

(b) Install the pressure regulator with the two bolts. Torque: 55 kg-cm (48 in.-lb, 5.4 N m)

2. CONNECT FUEL RETURN PIPE TO FUEL PRESSURE REGULATOR

Install the return pipe with new two gaskets and the union bolt.

3. CONNECT VACUUM SENSING HOSE TO FUEL PRESSURE REGULATOR

4. (w/ CRUISE CONTROL SYSTEM) INSTALL CRUISE CONTROL ACTUATOR (See step 33 page EM-225)

5. INSTALL RH ENGINE HOOD SIDE PANEL

6. CONNECT CABLE TO NEGATIVE TERMINAL OF BATTERY

7. CHECK FOR FUEL LEAKAGE (See page FI-9)

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment