Installation Of Starter

1. INSTALL STARTER

(a) Install the starter with the two bolts. Torque: 400 kg-cm (29 ft-lb, 39 N-m)

(b) Connect the starter connector.

(c) Connect the starter wire with the nut.

(d) Connect the starter cable with the nut.

(e) Install the terminal cover.

2. INSTALL AIR CLEANER

3S-GTE (See step 40 on page EM-202) 5S-FE (See step 35 on page EM-226)

3. INSTALL LH ENGINE HOOD SIDE PANEL

4. CONNECT CABLE TO NEGATIVE TERMINAL OF BATTERY

5. CHECK THAT ENGINE STARTS

Starter Relay

ST0891

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Responses

  • robinia
    How to hookup starter to 1991 mr2?
    8 years ago

Post a comment