Oil Pressure Check

1. CHECK ENGINE OIL QUALITY

Check the oil for deterioration, entry of water, discoloring or thinning.

If the quality is poor, replace the oil.

Oil grade: API grade SG, multigrade, fuelefficient and recommended viscosity oil

°F -20 0 20 40 60 80 100 °C -29 -18 -7 4 16 27 38

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

lu0884

2. CHECK ENGINE OIL LEVEL

The oil level should be between the "L" and "F" marks on the dipstick.

If low, check for the leakage and add oil up to "F" mark.

3S-GTE

Oil Pressure Gauge

3S-GTE

Oil Pressure Gauge

Mr2 Gage Oil Dipstick
lu 1006

5S-FE Pressure Gauge

5S-FE Pressure Gauge

Oil Pressure Switch Location 1989 Supra

lu1066

3. REMOVE OIL PRESSURE SWITCH

4. INSTALL OIL PRESSURE GAUGE

5. WARM UP ENGINE

Allow the engine to warm up to normal operating temperature.

6. CHECK OIL PRESSURE

Oil pressure:

7. REMOVE OIL PRESSURE GAUGE, AND REINSTALL OIL PRESSURE SWITCH

Apply adhesive to two or three threads of the oil pressure switch.

Adhesive: Part No. 08833-00080, THREE BOND 1344, LOCTITE 242 or equivalent

8. START ENGINE AND CHECK FOR LEAKS

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Responses

  • SAMUEL
    What is correct oil pressure mr2?
    8 years ago
  • awet abrha
    How to install oil pressure gauge mr2?
    8 years ago

Post a comment