Removal Of Cylinder Head

1. DISCONNECT CABLE FROM NEGATIVE TERMINAL OF BATTERY

CAUTION: Work must be started after approx. 20 seconds or longer from the time the ignition switch is turned to the "LOCK" position and the negative (-) terminal cable is disconnected from the battery.

2. DRAIN ENGINE COOLANT (See page CO-6)

3. REMOVE ENGINE UNDER COVERS

4. REMOVE ENGINE HOOD SIDE PANELS

5. REMOVE SUSPENSION UPPER BRACE

DISCONNECT THROTTLE CABLE FROM THROTTLE BODY

7. DISCONNECT ACCELERATOR CABLE FROM THROTTLE BODY

8. REMOVE CRUISE CONTROL ACTUATOR (w/ CRUISE CONTROL SYSTEM) AND ACCELERATOR LINKAGE (See step 11 on page EM-182)

9. REMOVE AIR CLEANER CAP (See step 9 on page EM-182)

10. DISCONNECT GROUND STRAP CONNECTOR

11. DISCONNECT VACUUM HOSES

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment