Repair Procedures

Most repair operations begin with an overview illustration. It identifies the components and shows how the parts fit together.

Example:

Example:

The procedures are presented in a step-by-step format:

• The illustration shows what to do and whereto do it.

• The task heading tells what to do.

• The detailed text tells how to perform the task and gives other information such as specifications and warnings.

Illustration: what to do and where

Example:

-Task heading: What to do

21. CHECK PISTON STROKE OF OVERDRIVE BRAKE

(a) Place SST and a dial indicator onto the overdrive brake piston as shown in the figure.

SST 09350-30020 (09350-06120)

Set part No. Component part No.

Detailed text: how to do task

(b) Measure the stroke applying and releasing the compressed air (4-8 kg/cm2, 57 -114 psi or 392 - 785 kPa) as shown in the figure.

Piston stroke: 1.40 - 1.70 mm (0.0551 - 0.0669 in.)

*Specification

This format provides the experienced technician with a FAST TRACK to the information needed. The upper case task heading can be read at a glance when necessary, and the text below it provides detailed information. Important specifications and warnings always stand out in bold type.

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment