Circuit description

Refer to DTC P0115 on page DI-32.

DTC No.

DTC Detecting Condition

Trouble Area

When the engine starts, the water temp. is -7°C (20° F) or less. And, 20 min. or more after the engine starts, the engine temp. sensor value is 5°C (41 °F) or less (2 trip detection logic)

When the engine starts, the water temp. is between -7°C (20°F) and 10°C (50°F). And, 5 min. or more after the engine starts, the engine coolant temp. sensor value is 5°C (41 °F) or less. (2 trip detection logic)

P0116

When the fluctuations in the engine coolant temperature are within 3 °C (37 °F)before and after the following conditions are met:

2. Vehicle speed change of 30 km/h (19 mph) or more occurs 10 times or more.

3. 35 °C (95 °F) § Engine coolant temperature when the ignition switch is turned ON < 60 °C (140 °F)

4. Intake air temperature after starting the engine a -6.7 °C (20 °F)

• Engine coolant temp. sensor

• Cooling system

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment