Repair or replace harness or connector be tween front passenger airbag assembly and air bag sensor assembly

Total OBD & ECU Auto Diagnostics

Total OBD & ECU Auto Diagnostics

Get Instant Access

2002 Toyota Echo Clock Spring

PREPARATION:

(a) Connect the connector to the airbag sensor assembly.

(b) Using a service wire, connect P+ and P- of the connector (on the front passenger airbag assembly side) between the front passenger airbag assembly and the airbag sensor assembly.

(c) Connect negative (-) terminal cable to the battery, and wait at least for 2 seconds.

CHECK:

(a) Turn the ignition switch to ON, and wait at least for 20 seconds.

(b) Clear the DTC stored in memory (See step 5 on page DI-509).

(c) Turn the ignition switch to LOCK, and wait at least for 20 seconds.

(d) Turn the ignition switch to ON, and wait at least for 20 seconds.

DTC B0107/51 is not output.

HINT:

Codes other than code B0107/51 may be output at this time, but they are not relevant to this check.

P Squib

Airbag

Sensor

Assembly

DLC3

DLC3

CG TC

Hoio24 ABoi19

Hioeoo Hoio75

DTC B0107/51

CG TC

Hoio24 ABoi19

Hioeoo Hoio75

H10616

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment