Resistance Below Q

Total OBD & ECU Auto Diagnostics

TOAD Auto Diagnostics

Get Instant Access

Check airbag sensor assembly.

D Squib hrrJAirbag

Sensor Assembly hrrJAirbag

Sensor Assembly cDS

D Squib

DLC3

DTC B0101/14

DLC3

CG TC

H01002

H02144 AB0119 H10600 W02044

CG TC

DTC B0101/14

H01002

H02144 AB0119 H10600 W02044

PREPARATION:

(a) Connect the connector to the airbag sensor assembly.

(b) Using a service wire, connect D+ and D- of the connector (on the spiral cable side) between the spiral cable and the steering wheel pad (D squib).

(c) Connect negative (-) terminal cable to the battery, and wait at least for 2 seconds.

CHECK:

(a) Turn the ignition switch to ON, and wait at least for 20 seconds.

(b) Clear the DTC stored in memory (See page DI-509).

(c) Turn the ignition switch to LOCK, and wait at least for 20 seconds.

(d) Turn the ignition switch to ON, and wait at least for 20 seconds.

DTC B0101/14 is not output.

HINT:

Codes other than code B0101/14 may be output at this time, but they are not relevant to this check.

H10R02

D Squib

<3ffl

Spiral Cable

DLC3

DLC3

CG TC

H01003 AB0119

H10600 W02044

CG TC

H01003 AB0119

H10600 W02044

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment