Lxg

NOTE: Only perform this installation step on the RES harness and V5 harness installed simultaneously.

(x) Secure the 2P connectors and 8P connectors to the vehicle harness with two wire ties. (Fig. 2-14)

CAUTION: Position the 8P and 2P connector exactly as shown. Otherwise when other vehicle parts are placed serious damages may occur to the vehicle parts or accessories.

(1) Do not secure the air bag harness (yellow connector wires).

(2) After securing the connector, temporarily install on the steering column cover and check if tilt and telescopic movement of the steering is smooth and not interfered by any object.

(3) Check that no wires are being pinched or pressed.

(y) Locate and disconnect the white 18P connector from the backside of the driver side J/B in the bottom of second space from the left. (Fig. 2-15)

RES Harness

Backside of the J/B

RES Harness' 18P

Backside of the J/B

RES Harness

Vehicle Harness' 18P

Fig. 2-16 RES Harness' 18P

Fig. 2-16 RES Harness' 18P

Vehicle Harness' 18P

(z) Plug in the RES harness' white 18P

connectors between the vehicle harness' 18P connector and the backside of the driver side J/B. (Fig. 2-16)

(1) Verify the connectors are plugged in securely.

'^v^ Side Cutter RES Harness Backside of J/B

'^v^ Side Cutter RES Harness Backside of J/B

(aa) Secure the 18P connector to the vehicle harness with one wire tie. (Fig. 2-17)

Go to step ee.

RES Harness and

V5 Harness / Backside of the J/B

RES Harness and

V5 Harness / Backside of the J/B

Fig. 2-18 V5 Harness' 18P Vehicle Harness' 18P

0 0

Post a comment