Introduction

Congratulations on your choice of the RS3200 Plus add-on security system to protect your vehicle! To get the most from the system, we strongly recommend that you read this Owners Guide completely to learn all of its features and functions.

The RS3200 Plus provides security through point-of-entry monitoring, intrusion detection and ignition switch monitoring. While Armed, the system will be Triggered and sound an Alarm when a door is forcibly unlocked or opened*, or when movement occurs inside the vehicle. During the Alarm, the vehicle's horn sounds and the headlights, tail lights and front marker or turn signal lights flash. Also, the vehicle's starter is disabled, preventing engine start. In addition to the comprehensive protection, the RS3200 Plus works in conjunction with your vehicle's remote keyless entry system, enabling you to Arm and Disarm the security system at the same time the doors are remotely locked and unlocked. In vehicles equipped with a buzzer, it will chirp when the system is Remote Armed and Disarmed.

An important note about your system:

Throughout this guide, there are references to the Status Monitor ® for this system. Illustrated below, this panel holds the LED indicator (for the system's operating status). In vehicles equipped with an engine immobilizer system, there is a LED already installed, so the RS3200 Plus utilizes the vehicle's engine immobilizer system LED®. If your vehicle falls into this category, remember to look at that LED when the information refers to the Status Monitor. If you do not know where the LED is located, refer to your vehicle's owner's guide for specific information.

LIGHTS FOR 30 SECONDS (PRE-ARM-ING) THEN STARTS FLASHING (SYSTEM IS ARMED)

LIGHTS FOR 30 SECONDS (PRE-ARM-ING) THEN STARTS FLASHING (SYSTEM IS ARMED)

0 0

Post a comment