Programming

The RS3200 Plus is factory-set to not Passively Arm. To change the system's operation for Passive Arming operation, as well as adjust the Entry Delay time, follow the procedure below. For more information on this feature, please refer to page 7.

PASSIVE ARMING ON/OFF SELECTION, ENTRY DELAY TIME SELECTION

2. Insert and remove the key from the ignition key cylinder 3 times; this must be completed within 5 seconds.

Close the driver's door.

Lock and unlock all doors 3 times by key or remote control.

Open and close the driver's door.

Lock, then unlock the driver's door inside lock button 3 times.

Close the driver's door.

Lock and unlock all doors 3 times by key or remote control.

Open and close the driver's door.

Open the driver's door.

Lock, then unlock the driver's door inside lock button 3 times.

Open the driver's door.

The system locks the door in 2 seconds; if this does not happen, start over.

unlock the driver's door knob.

3. Select the Operating Mode and Complete the Programming Procedure.

The system locks the door in 2 seconds; if this does not happen, start over. Programming is now complete.

a. Close, then Open the driver's door: b.

2 times = Passive Arming OFF

3 times = Passive Arming ON,

0 Sec. Entry Delay

4 times = Passive Arming ON,

15 Sec. Entry Delay

5 times = Passive Arming ON,

30 Sec. Entry Delay

Lock then unlock the driver's door inside lock button 1 time.

The system locks the door in 2 seconds; if this does not happen, start over. Programming is now complete.

AWarning

• This product is applicable only to vehicles with 12V DC, negative grounding specifications. Do not use in vehicles with 24V specifications. Otherwise, damage to the unit or a fire may result.

• Never attempt to disassemble or modify the product. Otherwise, an accident, fire or electric shock may result.

• When replacing fuses, be sure to use fuses with the same specified capacity (amperage.) Otherwise, damage to the unit or vehicle, fire or electric shock may result.

• If an abnormal condition occurs, such as liquids spilling onto the product, or the product emits smoke or strange odors, stop using it immediately and consult the dealer from whom you purchased the product. Continued use of the product before corrective actions are taken may result in an accident, injury or fire.

• Never pull the plastic bag over your head. Otherwise, a serious injury or death from suffocation may occur.

aCaution

• Do not use this product for applications other than in-vehicle use. Otherwise, an electric shock or injury may result.

• Do not allow children to play with the remote controls. Otherwise, the doors may be locked or unlocked, the security system armed or disarmed, or an alarm triggered unintentionally.

• If this product is dropped or its case is damaged, disconnect the power supply lead and contact the dealer from whom you purchased it to obtain service. Otherwise, a fire or electric shock may result.

• In order for the security system to be activated, the back door window must be closed.

• All security features may not be applicable to all vehicle models.

• Contents subject to change.

+1 -1

Post a comment