Remove Oil Filter Cap Assembly

(a) Connect the hose to a pipe. HINT:

The drain pipe is supplied with the oil filter element.

(b) Remove the oil filter drain plug and O-ring, and then insert the drain pipe into the oil filter cap and drain the engine oil into a container.

(c) Make sure that oil is completely drained, and remove the pipe and O-ring. HINT:

Be sure to turn the pipe in the direction of the arrow to remove it.

(d) Using SST, remove the oil filter cap together with the oil filter element. SST 09228-06501

Rav4 Oil Filter Cap

3. REMOVE OIL FILTER ELEMENT

(a) Remove the oil filter element and 2 O-rings from the oil filter cap. NOTICE:

Be sure to remove the O-ring (for the cap) by hand, without using any tools, to prevent damage to the groove for the O-ring on the cap.

4. INSTALL OIL FILTER ELEMENT

(a) Clean the oil filter cap threads and O-ring groove.

(b) Apply a small amount of engine oil to a new O-ring and install it to the oil filter cap.

(c) Set a new oil filter element in the oil filter cap.

0 0

Post a comment