3. Trip meter reset knob—Resets the two trip meters to zero, and also change the meter display.
To change the meter display, quickly push and release the knob. The meter display changes in the order from the odometer to trip meter A to trip meter B, then back to the odometer each time you push.
To reset the trip meter A to zero, display the meter A reading, then push and hold the knob until the meter is set to zero. The same process can be applied for resetting the trip meter B.
The displayed temperature ranges from -40oC (-40oF) up to 50oC (122°F).
The key must be in the "ON" position.
If an abnormality exists in the connection of the outside air temperature sensor, "-- oC" will appear on the display. If "-- oC" appears on the display, contact your Toyota dealer.
When the outside air temperature falls below 3oC (37oF) while driving, the temperature display flashes to indicate that the outside air temperature is becoming low. However, if the temperature is already 3oC (37oF) or below, the display does not flash when ignition is turned on.
Was this article helpful?