The SRS side airbag and curtain shield airbag system consists mainly of the following components, and their locations are shown in the illustration.
2. "AIRBAG ON" and "AIRBAG OFF" indicator lights
3. Curtain shield airbag modules (airbag and inflator)
4. Front passenger occupant classification system (ECU and sensors)
5. Side airbag modules (airbag and inflator)
7. Side and curtain shield airbag sensors
9. Front passenger's seat belt buckle switch
The SRS side airbag and curtain shield airbag system is controlled by the airbag sensor assembly. The airbag sensor assembly consists of a safing sensor and airbag sensor.
In a severe side impact, the side and curtain shield airbag sensor and/or the curtain shield airbag sensor trigger(s) the side airbag inflators and/or the curtain shield airbag inflators. At this time a chemical reaction in the inflators quickly fills the airbags with non-toxic gas to help restrain the lateral motion of the occupants.
In a vehicle rollover, the airbag sensor assembly triggers the curtain shield airbag inflator. At this time, a chemical reaction in the inflators quickly fills the airbags with non- toxic gas to help restrain the lateral motion of the occupants.
When the airbags in fairly loud noise and and residue along wit does not indicate a remain inside the ve and may cause som the eyes, skin or b wash off any residue to prevent any poten soap and water. If from the vehicle, you diately.
Deployment of the a fraction of a second, inflate with considera system is designed t ries, it may also ca abrasions and swellii
Front seats as well and rear pillars, fro garnish and roof int several minutes, bu selves will not be h designed to inflate o
Was this article helpful?