High-Low beams—For high beams, turn the headlights on and push the lever away from you (position 1). Pull the lever toward you (position 2) for low beams.
The headlight high beam indicator light (blue light) on the instrument panel will tell you that the high beams are on.
Flashing the high beam headlights
(position 3)—Pull the lever all the way back. The high beam headlights turn off when you release the lever.
You can flash the high beam headlights with the knob turned to "OFF".
To signal a turn, push the headlight/ turn signal lever up or down to position 1.
The key must be in the "ON" position.
The lever automatically returns after you make a turn, but you may have to return it by hand after you change lanes.
To signal a lane change, move the lever up or down to the pressure point (position 2) and hold it.
If the turn signal indicator lights (green lights) on the instrument panel flash faster than normal, a front or rear turn signal bulb is burned out. See "Replacing light bulbs" on page 386 in Section 7-3.
Was this article helpful?