To activate the system push the Auto Lsd switch with the vehicle stopped

The "AUTO LSD" indicator light will come on and remain on while the system is on. While the system is operating, the slip indicator light will also flash.

To cancel the system, push the "AUTO LSD" switch once again and the "AUTO LSD" indicator light will go off.

If the vehicle speed exceeds 50 km/h (31 mph), this system will be cancelled automatically.

The "AUTO LSD" indicator light will come on for a few seconds when the ignition key is turned to "ON". If the indicator light does not come on when the ignition key is turned to "ON" or the "AUTO LSD" switch is pushed, contact your Toyota dealer.

If the brake actuator temperature becomes too high, a buzzer will sound for about 3 seconds. (The slip indicator light will also be lit.) The system will temporarily stop operating in order to protect the brake actuator. Although "AUTO LSD" system is not operating, it is still possible to continue your driving.

The operation of the system will be automatically restored after the actuator cools down. After operation is restored, the slip indicator light will go off.

Was this article helpful?

0 -1
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Responses

  • bladud
    How to activate auto lsd on 2007?
    8 years ago
  • maya
    What is "lsd" light on rav 4?
    8 years ago
  • stephanie wright
    What is auto LSD in toyota sequoia?
    8 years ago
  • denise
    When to activate the lsd in the rav4?
    5 years ago
  • lobelia
    How i active Auto LSD Light on RAV4?
    4 years ago

Post a comment