Dtc Summary

DTCs

Monitoring Items

Malfunction Detection Conditions

Trouble Areas

Detection Timings

Detection Logic

P043E

Reference orifice clogged

P043E, P043F, P2401, P2402 and

P2419 present when one of following conditions met during key-off EVAP

monitor:

• EVAP pressure just after reference pressure measurement greater than -1 kPa-g (-7.5 mmHg-g)

• Reference pressure less than -4.85 kPa-g (-36.4 mmHg-g)

• Reference pressure greater than -1.057 kPa-g (-7.93 mmHg-g)

• Reference pressure not saturated

• Reference pressure difference between first and second 0.7 kPa-g (5.25 mmHg-g) or more

HINT:

Typical example values

• Canister pump module (Reference orifice, leak detection pump, vent valve)

• Connector/wire harness (Canister pump module -ECM)

• EVAP system hose (pipe from air inlet port to canister pump module, canister filter, fuel tank vent hose)

• ECM

While ignition switch OFF

2 trip

P043F

Reference orifice high-flow

• Canister pump module (Reference orifice, leak detection pump, vent valve)

• Connector/wire harness (Canister pump module -ECM)

• EVAP system hose (pipe from air inlet port to canister pump module, canister filter, fuel tank vent hose)

• ECM

While ignition switch OFF

2 trip

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment