Inspect Canister Pump Module Power Source For Vent Valve

Canister Pump Module Rav4

Result

(a) Turn the ignition switch OFF.

(b) Disconnect the S3 canister pump module connector.

(c) Turn the ignition switch ON.

(d) Measure the voltage between VLVB terminal of the canister pump module connector and the body ground.

Result

Test Results

Suspected Trouble Areas

Proceed To

9 to 14 V

1. Wire harness between vent valve and ECM

2. Vent valve

3. ECM

A

Below 3 V

Power source wire harness of vent valve

B

(e) Reconnect the canister pump module connector.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Responses

  • katharina
    Where is the vacuum pump module on 2011 rav 4?
    6 months ago

Post a comment