Standard voltage

Tester Connections

Specified Conditions

B7-2 (+B) - Body ground

9 to 14 V

(d) Reconnect the A/F sensor connector.

Go to step S

Go to step S

INSPECT INTEGRATION RELAY (EFI MAIN RELAY)

Integration Relay:

Fuse Side:

EFI MAIN

Connector Side:

n

|8|7|6|5|4|3|2|1 |

|8|7|6|5|4|3|2|1|

A107921E14

(a) Remove the integration relay from the engine room No. 1 relay block.

(b) Inspect the EFI MAIN fuse.

(1) Remove the EFI MAIN fuse from the integration relay.

(2) Measure the EFI MAIN fuse resistance. Standard resistance:

Below 1 Q

(3) Reinstall the EFI MAIN fuse.

(c) Inspect the EFI MAIN relay.

(1) Measure the EFI MAIN relay resistance. Standard resistance

A107921E14

Tester Connections

Specified Conditions

1C-1 - 1A-4

10 kQ or higher

Below 1 Q (Apply battery voltage between terminals 1A-2 and 1A-3)

(d) Reinstall the integration relay. NG>

REPLACE INTEGRATION RELAY

4

CHECK HARNESS AND CONNECTOR (A/F SENSOR - EFI RELAY)

Wire Harness Side:

Wire Harness Side:

A/F Sensor Connector +B

Integration Relay

Integration Relay

-

□ □

i—i i—i

i—i i—i

i—i i—i

i—i

r

Engine Room No. 1 Relay Block

(b) Disconnect the B7 A/F sensor connector.

(c) Remove the integration relay from the engine room No. 1 relay block.

(d) Check the resistance.

Standard resistance (Check for open)

Tester Connections

Specified Conditions

B7-2 (+B) - 1A-4 (Engine room No. 1 R/B)

Below 1 Q

Standard resistance (Check for short)

Standard resistance (Check for short)

Tester Connections

Specified Conditions

B7-2 (+B) or 1A-4 (Engine room No. 1 R/B) - Body ground

10 kQ or higher

(e) Reconnect the A/F sensor connector.

(f) Reinstall the integration relay.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment