Typical Enabling Conditions

Monitor runs whenever following DTCs not present

P0011 (VVT System 1 - Advance)

P0012 (VVT System 1 - Retard)

P0100 - P0103 (MAF meter)

P0110 - P0113 (IAT sensor)

P0115 - P0118 (ECT sensor)

P0120 - P0223, P2135 (TP sensor)

P0125 (Insufficient ECT for Closed Loop)

P0171, P0172 (Fuel system)

P0300 - P0304 (Misfire)

P0335 (CKP sensor)

P0340 (CMP sensor)

P0351 - P0354 (Igniter)

P0450 - P0453 (EVAP press sensor)

P0500 (VSS)




4.4°C (40°F) or more


4.4°C (40°F) or more

Canister pressure sensor malfunction

Not detected

Purge VSV

Not operated by scan tool

EVAP system check

Not operated by scan tool

Battery voltage

10 V or more

Purge duty cycle

8 % or more

Typical Malfunction Thresholds

Both of following conditions met

Conditions 1 and 2

1. EVAP pressure change when purge operation started

Less than 0.1 kPa-g (0.75 mmHg-g)

2. EVAP pressure change during purge operation when vent valve closed

Less than 0.5 kPa-g (3.75 mmHg-g)

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment