Front Planetary Gear

Disassembly & Inspection

Remove thrust bearings and races from planetary gear and front planetary ring gear. Note direction of race installation. Measure front planetary ring gear bushing inside diameter. Replace planetary ring gear if bushing diameter exceeds .948" (24.08 mm). Measure planetary pinion gear thrust clearance. Clearance should be .008.024" (.20-.61 mm). Maximum clearance is .039" (1.00 mm). If clearance is not within specifications, replace planetary gear assembly.

Reassembly

Coat thrust bearings and races with petroleum jelly. Install thrust bearings and races, ensuring tabs on race align with planetary gear. Install races in planetary ring gear and planetary gear with the flat side against the gear surface. See Fig. 40.

2001-05 AUTOMATIC TRANSMISSIONS A340E & A340F Overhaul

Planetary Gear Bearings
Fig. 40: Exploded View Of Front Planetary Gear Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment