Start the inspection from step in case of WD and start from step in case of WD

2001 BRAKES ABS With EBD & Trac & VSC System - Diagnostics - Sequoia

1. Check for short circuit in harness and connector between TERMINALS EXI AND EXI2 OF SKID CONTROL ECU AND EXI1 OF TRANSLATE ECU .

NG: Repair or replace harness or connector.

2. Check operation of the center diff. lock indicator light.

PREPARATION:

a. Turn the ignition switch ON.

b. Shift the transfer shift lever to the L position.

CHECK:

Check that the center diff. lock indicator light is ON when the transmission shift lever is in L position and OFF when it is in any other position.

HINT:

When the center differential cannot be shifted to LOCK smoothly, the center diff. lock indicator light will blink.

3. Check center diff. lock indicator light.

See COMBINATION METER TROUBLESHOOTING .

NG: Repair bulb or combination meter assembly. OK: GO TO NEXT STEP

4. Check that the 4WD ECU connectors are securely connected to the 4WD ECU.

NO: Connect the connector to the 4WD ECU. YES: GO TO NEXT STEP

5. Check for open and short circuit in harness and connector between TERMINALS EXI AND EXI2 OF SKID CONTROL ECU AND EXI1 OF TRANSLATE ECU .

NG: Repair or replace harness or connector.

OK: GO TO NEXT STEP

6. Replace the translate ECU and check whether or not the trouble occurs again.

YES: Check and replace skid control ECU. NO: Check and replace translate ECU

DTC C1360 / 61: MASTER CYLINDER PRESSURE SENSOR CIRCUIT

2001 BRAKES ABS With EBD & Trac & VSC System - Diagnostics - Sequoia

CIRCUIT DESCRIPTION

DTC No.

DTC Detecting Condition

Trouble Area

C1360/ 61

When any of the following is detected: 1 Noise to ECU terminal PMC occurs

2. While ECU terminal STP is OFF, ECU terminal PMC voltage is out of standard range.

3. When ECU terminal IG1 voltage is proper. ECU terminal VCM voltage is out of range.

4. When ECU terminal VCM voltage is proper, ECU terminal PMC voltage is out of range.

• Master cylinder pressure sensor

• Master cylinder pressure sensor circuit

G02Î1022C

G02Î1022C

Fig. 71: DTC C1360 / 61 Master Cylinder Pressure Sensor Circuit Description

WIRING DIAGRAM

Toyota Yaris Abs Vsc Fault
Fig. 72: DTC C1360 / 61 Master Cylinder Pressure Sensor Wiring Diagram

INSPECTION PROCEDURE

2001 BRAKES ABS With EBD & Trac & VSC System - Diagnostics - Sequoia

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment