Will cause deformation

1. Using a dial indicator, check the runout of the propeller shafts. The maximum runout is 0.031" (1.8 mm) measured at the midpoint of the shaft. If the shaft runout is greater than the maximum, replace the shaft.

2. Inspect the spider bearing for wear or damage.

3. Using a dial indicator, check the spider bearing axial play by turning the yoke of the flange while holding the shaft tightly. The maximum bearing axial play is 0.0020" (0.05 mm). If the spider bearing axial play exceeds the maximum, replace the spider bearing.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment