DTC No C is for the left front speed sensor DTC No C is for the right rear speed sensor DTC No C is for the left rear speed sensor

WIRING DIAGRAM

2004 BRAKES ABS With EBD & BA & TRAC & VSC System - Diagnostics - Sequoia

Mr2 Speedo Wire Diagram

Fig. 30: Wiring Diagram Speed Sensor

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 30: Wiring Diagram Speed Sensor

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

INSPECTION PROCEDURE

NOTE: Start the inspection from step 1 in the case of using the TOYOTA hand-held tester and start from step 2 in the case of not using TOYOTA hand-held tester.

1. Check output value of speed sensor. PREPARATION:

a. Connect the TOYOTA hand-held tester to the DLC3.

b. Turn the ignition switch ON and push the TOYOTA hand-held tester main switch ON.

c. Select the DATALIST mode on the TOYOTA hand-held tester.

CHECK:

Check that there is no difference between the speed value output from the speed sensor displayed by the TOYOTA hand-held tester and the speed value displayed by the speedometer when driving the vehicle.

There is almost no difference from the displayed speed value.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment