Twl

Fig. 60: Applying FIPG To Differential

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

d. Install the differential tube to the differential.

e. Clean the threads of the 2 long Torx bolts and retainer bolt holes with toluene or trichlorethylene.

f. Apply adhesive to 2 or 3 threads of the long bolts end.

Adhesive:

Part No. 08833-00070, THREE BOND 1324 or equivalent g. Using Torx socket (E14), torque the 4 Torx bolts.

Torque: 78 N.m (800 kgf.cm, 58 ft.lbf) 32. INSTALL A.D.D. ACTUATOR

2004 DRIVELINE/AXLES Front Differential Carrier - Sequoia a. Remove any old FIPG material and be careful not to drop oil on the contact surfaces of the actuator and clutch case.

b. Clean both installation surfaces of loose FIPG and oil material with gasoline or alcohol.

G02927687

Fig. 61: Applying Adhesives To Long Bolts End (2-3 Threads) Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

c. Apply FIPG to the clutch case, as shown in the illustration.

FIPG:

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment