Install Air Cleaner And Intake Air Connector Pipe Assembly

a Install the air cleaner case with the 3 bolts

2004 ENGINE Engine Unit (4WD) - Sequoia

b. Connect the intake air connector to the throttle body.

c. Connect the MAF meter connector.

Install the suction hose to the intake air connector.

e. Connect the PS air hose, air inlet hose for EVAP, PCV hose and MAF meter connector to the intake air connector.

10. INSTALL THROTTLE BODY COVER

11. INSTALL TRANSMISSION (See INSTALLATION )

12. INSTALL RADIATOR ASSEMBLY (See INSTALLATION )

13. INSTALL FRONT STABILIZER BAR ( STABILIZER BAR )

14. INSTALL FRONT AND REAR PROPELLER SHAFTS (See INSTALLATION )

15. INSTALL FRONT EXHAUST PIPES (See COMPONENTS )

16. FILL WITH ENGINE COOLANT (See REPLACEMENT )

17. FILL WITH ENGINE OIL (See REPLACEMENT )

18. START ENGINE AND CHECK FOR LEAKS

19. INSTALL ENGINE UNDER COVERS

20. INSTALL HOOD

21. PERFORM ROAD TEST

Check for abnormal noise, shock, slippage, correct shift points and smooth operation.

22. RECHECK ENGINE COOLANT AND OIL LEVELS

2004 ENGINE Exhaust System - Sequoia

COMPONENTS

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment