Install Throttle Body

a. Connect the water bypass hose to the manifold thermostat on the throttle body.

2004 ENGINE SFI System - Sequoia

Water Bypass Hose

Esquema Canister Motor Honda Fit

Fig. 66: Connecting Water Bypass Hose

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 66: Connecting Water Bypass Hose

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Install a new gasket and the throttle body with the 2 bolts and 2 nuts. Torque: 18 N.m (185 kgf.cm, 13 ft.lbf)

c. Connect the water bypass hose and PCV hose to the throttle body.

d. Connect the throttle control connector.

2. INSTALL INTAKE AIR CONNECTOR

3. FILL WITH ENGINE COOLANT (See REPLACEMENT )

4. START ENGINE AND CHECK FOR ENGINE COOLANT LEAKS

5. INSTALL THROTTLE BODY COVER

2004 ENGINE SFI System - Sequoia

1992 Toyota Pickup Coolant Bypass Hose
Fig. 67: Connecting Water Bypass Hose And PCV Hose Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Responses

  • prisca
    How to connect hoses on 1996 toyota camry throttle body?
    1 year ago
  • valente
    How to clean throttle body 2004 sequoia?
    2 months ago

Post a comment