NOTE Before inspecting the wheel alignment adjust the vehicle height to the specified value

If the vehicle height is not the specified value, try to adjust it by pushing down on or lifting the body.

2. INSTALL CAMBER-CASTER-KINGPIN GAUGE OR POSITION VEHICLE ON WHEEL ALIGNMENT TESTER

Follow the specific instructions of the equipment manufacturer.

2004 SUSPENSION Front Wheel Alignment - Sequoia

Srrpent Poisson Chien

G02927603

Fig. 3: Identifying Wheel Alignment Tester Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

3. INSPECT CAMBER, CASTER AND STEERING AXIS INCLINATION

Camber, caster and steering axis inclination:

2004 SUSPENSION Front Wheel Alignment - Sequoia

* Camber UCK35L-GKSSKA

Right-left error

UCK35L-GKSLKA

Right-left error

UCK45L-GKSSKA

Right-left error

UCK45L-GKSLKA

Right-left error

30' (0.5°) or less (TOG1 ± 45' (0.10° ± 0.75°)

30' (0.5°) or less 0°17' ± 45' (0.28° ± 0.75°)

30' (0.5°) or less 0°16' ± 45' (0.26° ± 0.75°) 30' (0.5°) or less

UCK35L-GKSSKA Tire size: P245/70R16 Tire size: P265/70R16 and P265/65R17

Right-left error

UCK35L-GKSLKA

Right-left error

UCK45L-GKSSKA

Right-left error

UCK45L-GKSLKA

Right-left error

2°56' ± 45' (2.93° ± 0.75°) 2"59' ± 45' (2.9811 ± 0.75°)

30' (0.5°) or less 3°02' ± 45' (3.04° ± 0.75°)

30' (0.5°) or less 2°36' ± 45' (2.60° ± 0.75°)

30' (0.5°) or less 2"39' ± 45' (2.65° ± 0.75°) 30' (0.5°) or less

• Steering axis inclination UCK35L-GKSSKA

Right-left error

UCK35L-GKSLKA

Right-left error

UCK45L-GKSSKA

Right-left error

UCK45L-GKSLKA

Right-left error

30' (0.5°) or less 10°40' ± 45' (10.66° ± 0.75°)

30' (0.5°) or less 10°29' ± 45' (10.48° ± 0.75°)

30' (0.5°) or less 10°30' ± 45' (10.50° ± 0.75°) 30' (0.5°) or less

G02927604

G02927604

Fig. 4: Camber, Caster & Steering Axis Inclination Table Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

If the steering axis inclination is not within the specified value, after the camber and caster have been correctly adjusted, recheck the steering knuckle and front wheel for bearing or looseness.

4. ADJUST CAMBER AND CASTER

2004 SUSPENSION Front Wheel Alignment - Sequoia a. Loosen the front and/or rear adjusting cam set bolts.

b. Adjust the camber and caster by front and/or rear adjusting cams (See adjustment chart).

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Responses

Post a comment