NOTE Do not fill with engine oil above the F mark

3. REMOVE ENGINE UNDER COVER

Toyota Supra Oil Switch

Fig. 2: Removing Oil Pressure Switch

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 2: Removing Oil Pressure Switch

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

4. REMOVE OIL PRESSURE SWITCH

5. INSTALL OIL PRESSURE GAUGE

6. WARM UP ENGINE

Allow the engine to warm up to normal operating temperature.

7. CHECK OIL PRESSURE Oil pressure:

OIL PRESSUR

E

At idle

29 kPa (0.3 kgf/cm2 , 4.2 psi) or more

At 3,003 rpm

294 - 588 kPa (3.0 - 6.0 kgf/cm2 , 43 - 85 psi)

2004 ENGINE Oil & Filter - Sequoia

8. REMOVE OIL PRESSURE GAUGE

9. REINSTALL OIL PRESSURE SWITCH

a. Apply adhesive to 2 or 3 threads of the oil pressure switch.

Adhesive:

Part No. 08833-00480, THREE BOND 1344, LOCTITE 242 or equivalent b. Reinstall the oil pressure switch.

10. START ENGINE, AND CHECK FOR ENGINE OIL LEAKS

11. REINSTALL ENGINE UNDER COVER

G02927389

Fig. 3: Applying Adhesive To Threads Of Oil Pressure Switch Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment