NOTE Start the inspection from step in the case of using the Toyota handheld tester and start from step in the case of not using the Toyota handheld tester

Total OBD & ECU Auto Diagnostics

TOAD Auto Software

Get Instant Access

1. Check output value of the steering angle sensor. PREPARATION:

a. Connect the TOYOTA hand-held tester to the DLC3.

b. Turn the ignition switch ON and push the TOYOTA hand-held tester main switch ON.

c. Select the DATALIST mode on the TOYOTA hand-held tester. (Item: STEERING ANG)

CHECK:

2004 BRAKES ABS With EBD & BA & TRAC & VSC System - Diagnostics - Sequoia

Check that the steering wheel turning angle value of the steering angle sensor displayed on the TOYOTA hand-held tester is changing when turning the steering wheel.

Turn the steering wheel to the Left: Value increases Turn the steering wheel to the Right: Value decreases

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment