NOTE Take care not to scratch the serration of the speed sensor rotor

5. On all models, remove oil seal (outside). Using a screwdriver, remove the oil seal (outside) from the steering knuckle.

6. Using snap ring pliers, remove the snap ring. Using Special Tool (09950-60020, 09951-00810, 0995070010, 09951-07150) and a press, remove the bearing from the steering knuckle. See Fig. 2 .

2002-04 SUSPENSION Front - Sequoia

Ceramic Speed Hub Exploded View
Fig. 1: Exploded View Of Front Axle Hub & Bearing Assembly Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2002-04 SUSPENSION Front - Sequoia

Fig. 2: Front Hub Bearing Disassembly

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 2: Front Hub Bearing Disassembly

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Reassembly

2002-04 SUSPENSION Front - Sequoia

1. Using Special Tool (09527-17011, 09950-60020, 09951-00910) and a press, install a new bearing to the steering knuckle. Using snap ring pliers, install a new snap ring. See Fig. 3 .

2. Using Special Tool (09223-15030, 09527-17011) and a plastic hammer, install a new oil seal (outside). Coat MP grease to the oil seal lip.

3. Install the dust cover to the steering knuckle with the 4 bolts. Torque to specification. See TORQUE SPECIFICATIONS . Using Special Tool (09649-17010) and a press, install the axle hub to the steering knuckle.

4. Install the bearing spacer and ABS speed sensor rotor.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment