P

G02927707

Fig. 13: Removing Oil Seal

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Using SST and a hammer, install a new oil seal.

SST 09950-60020 (09951-00730), 09950-70010 (09951-07150)

c. Coat MP grease to the oil seal lip.

2004 DRIVELINE/AXLES Rear Axle Shaft - Sequoia

G02927708

Fig. 14: Installing New Oil Seal

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

REASSEMBLY

1. INSTALL BEARING ASSEMBLY

Position the backing plate on the bearing assembly and using a press and 2 socket wrenches, install the serration bolts.

2004 DRIVELINE/AXLES Rear Axle Shaft - Sequoia

Fig. 15: Installing Bearing Assembly

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 15: Installing Bearing Assembly

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2. INSTALL OIL DEFLECTOR AND GASKET

Position a new gasket and oil deflector on the axle shaft and install a washer and nut to a new hub bolt, as shown in the illustration, and install the hub bolt by torquing the nut.

3. INSTALL REAR AXLE SHAFT TO BACKING PLATE

a. Install the backing plate, spring washer and bearing retainer on the rear axle shaft.

2004 DRIVELINE/AXLES Rear Axle Shaft - Sequoia

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment