2004 Toyota Sequoia Rear Bearing Replacement

1. REMOVE ENGINE UNDER COVER

2. DRAIN DIFFERENTIAL OIL

3. REMOVE FRONT PROPELLER SHAFT (See REMOVAL )

4. REMOVE COMPANION FLANGE

a. Using a chisel and hammer, loosen the staked part of the nut.

b. Using SST to hold the flange, remove the nut. SST 09330-00021

c. Using SST, remove the companion flange.

SST 09950-30012 (09951-03010, 09953-03010, 09954-03010, 09955-03030, 09956-03020)

2004 DRIVELINE/AXLES Front Differential Rear Oil Seal - Sequoia

Oil Slinger

G02927618

Fig. 2: Loosening Staked Part Of Flange Nut Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

5. REMOVE OIL SEAL AND OIL SLINGER

a. Using SST, remove the oil seal. SST 09308-10010

b. Remove the oil slinger.

2004 DRIVELINE/AXLES Front Differential Rear Oil Seal - Sequoia

Sst Tool Toyota

Fig. 3: Removing Companion Flange

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 3: Removing Companion Flange

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

6. REMOVE REAR BEARING AND BEARING SPACER

2004 DRIVELINE/AXLES Front Differential Rear Oil Seal - Sequoia

Remove Bearing From Motor

Fig. 4: Removing Oil Seal

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 4: Removing Oil Seal

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

a. Using SST, remove the rear bearing from the drive pinion. SST 09556-22010

b. Remove the bearing spacer.

7. INSTALL BEARING SPACER, REAR BEARING AND OIL SLINGER a. Install a new bearing spacer and place the rear bearing and oil slinger.

2004 DRIVELINE/AXLES Front Differential Rear Oil Seal - Sequoia

Toyota Sequoia Front Drive Shaft Pinion
Fig. 5: Removing Rear Bearing From Drive Pinion Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Using SST and the companion flange, install the rear bearing, then remove the companion flange. SST 09950-30012 (09951-03010, 09953-03010, 09954-03010, 09955-03030, 09956-03020)

2004 DRIVELINE/AXLES Front Differential Rear Oil Seal - Sequoia

Sst 09556 22010

Fig. 6: Installing Rear Bearing

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 6: Installing Rear Bearing

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

9. INSTALL OIL SEAL

a. Coat a new oil seal lip with MP grease.

b. Using SST and a hammer, install the oil seal. SST 09554-22010

Oil seal drive in depth: 4.5 +/- 0.3 mm (0.177 +/- 0.012 in.) 10. INSTALL COMPANION FLANGE

a. Place the companion flange on the drive pinion.

b. Coat the threads of a new nut with hypoid gear oil.

c. Using SST to hold the flange, torque the nut. SST 09330-00021

2004 DRIVELINE/AXLES Front Differential Rear Oil Seal - Sequoia

Rtrp Fittings

Fig. 7: Installing Oil Seal

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 7: Installing Oil Seal

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2004 DRIVELINE/AXLES Front Differential Rear Oil Seal - Sequoia

Bilancia Colorare

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Responses

  • Niko
    How do i replace difencial on 2004 toyoto sequioa?
    1 year ago
  • luca
    How much does a back wheel bearing cost for a 2004 toyota sequia?
    10 months ago
  • matthias
    How to fix a wheel seal on a 04 toyota sequioa?
    6 months ago

Post a comment