Removal & Installation
2. Remove 7 screws and front and rear door scuff plates. Remove front door opening trim weatherstrip. Remove front seat belt lower anchor bolt. Using screwdriver, remove lower center pillar garnish. Using screwdriver, remove front seat belt shoulder anchor cover. Remove front seat belt shoulder anchor bolt and shoulder anchor. Disconnect pretensioner connector. Remove bolts and seat belt pretensioner assembly.
3. To install, reverse removal procedure. Tighten fasteners to specification. See TORQUE SPECIFICATIONS . Activate air bag system. See ACTIVATING SYSTEM under DISABLING & ACTIVATING AIR BAG SYSTEM.
Was this article helpful?