Bearing and race diameter

BEARING AND RACE D]

[AMETER

Item

Inside

Outside

No. 7 thrust bearing race

33.4 mm (1.315 in.)

49.0 mm (1.929 in.)

Thrust needle roller bearing

32.1 mm (1.264 in.)

49.35 mm (1.943 in.)

No. 8 thrust bearing race

32.1 mm (1.264 in.)

49.0 mm (1.929 in.)

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 298: Installing Rear Planetary Ring Gear Flange Sub-Assembly Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

11. INSTALL NO. 3 1-WAY CLUTCH ASSEMBLY

a. Install the No. 3 1-way clutch assembly and 1-way clutch inner race to the intermediate shaft.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 299: Installing No. 3 1-Way Clutch Assembly Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

12. INSTALL INTERMEDIATE SHAFT

a. Install the intermediate shaft with the No. 3 1-way clutch assembly to the case.

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 300: Installing Intermediate Shaft With No. 3 1-Way Clutch Assembly To Case Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Using SST, install the snap ring.

SST 09350-30020 (09350-07050, 09350-07060)

2006 TRANSMISSION A750E Automatic Transaxle - Sequoia

Fig. 301: Installing Snap Ring

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 301: Installing Snap Ring

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment