Check Abs Warning Light

a. Connect the intelligent tester to the DLC3.

b. Turn the ignition switch to the ON position and intelligent tester main switch ON.

2006 BRAKES Brake Control - Sequoia c. Select the ACTIVE TEST mode on the intelligent tester.

d. Check that "ON" and "OFF" of the ABS warning light can be shown on the combination meter with the intelligent tester.

TEM REFERENCE

Item

Vehicle Condition/Test Details

Diagnostic Note

ABS WARN LIGHT

Turn ABS warning light ON/OFF

Observe combination meter

OK: ABS warning light operates.

OK: ABS warning light operates.

OK: GO TO NEXT STEP.

2. CHECK DTC

RESULT:

RESULT PROCEED

Result

Proceed to

DTC is not output

A

DTC is output

B

B: REPAIR CIRCUITS INDICATED BY OUTPUT DTCS A: GO TO NEXT STEP.

3. CHECK THAT SKID CONTROL ECU CONNECTOR SECURELY CONNECTED NG: CONNECT CONNECTOR CORRECTLY

OK: GO TO NEXT STEP.

4. CHECK HARNESS AND CONNECTOR (SKID CONTROL ECU - COMBINATION METER) NG: REPAIR OR REPLACE HARNESS OR CONNECTOR

OK: GO TO NEXT STEP.

5. CHECK COMBINATION METER

a. Perform combination meter troubleshooting (See HOW TO PROCEED WITH TROUBLESHOOTING ).

NG: REPAIR OR REPLACE COMBINATION METER

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment